Salter-brecknell C3235 Uživatelský manuál

1C3235 CheckweigherUser Instructions1.0 IntroductionThe C3235 is a checkweighing scale for the rapid indication of over, under or acceptable weight in

104. Press the F key to toggle between the choices. If you choose on, the scale will automatically power off after 10 minutes. If you choose oFF, the

11Current setting, Zero0.5 through Zero5.0, is displayed.4. Press the F key repeatedly to scroll through the choices. Choices are in 1/2 division incr

122. Place the scale on stable, level surface and turn the unit on.3. After the self-check is complete, press and hold the TARE key until…CAL is brief

136. Repeatedly press the F key to scroll through the choices. When your choice is displayed, press the TARE key…The display will briefly show 1/3 cap

148.0 SpecificationsModels C3235-3/6 C3235-6/12 C3235-15/30Max. Cap. 3kg/6lb 6kg/12 lb 15kg/30lbDivision Size 0.5g/0.01 lb 1g/ 0.02 lb 2g/0.05 lb Max

15

16Salter Brecknell Weighing Products1000 Armstrong Dr.Fairmont, MN 56031Toll free: 800-637-0529Tel: 507-238-8702 Fax: 507-238-8271e-mail: sales@salter

2Keys and Annunciators Display Messagesdc x.xx This is the voltage of the battery in volts.------ This is displayed and a beep sounds when the scale i

32.0 General Scale InformationRead this user manual before using the scale so you understand the operating features. Do not overload the scale or thro

4The steps for various kinds of weighing are explained in the following pages. To set parameters and calibrate the unit, see Accessing the Configurati

55.0 Checkweighing1. Power up the scale.2. Zero the scale if necessary by pressing the ZERO key…0 is displayed.3. Place the item to be checkweighed o

6You use the Configuration menu to set the following parameters:rAngE Use this to set the Over/Accept/Under ranges.Units Use this to set the unit of m

7The current value for the lower range is displayed, the Under annunciator flashes, and the first digit flashes. What you set with the following steps

82. Remove the item from the scale and repeat steps 1 and 2.UnitsUse the Units menu item to set the unit of measure to Lbs, Kgs or Grams. You can also

9Counting OperationEnter the counting mode by selecting PCS as the unit of measure. This is explained in the previous section. If your scale has no pi